top of page
Search

Open-Width vs Tubular Knit Finishing: Which Does Your Fabric Need?

psytz7
Oct 21
3 min read

Updated: 2 days ago

Circular knitting machines produce fabric as a continuous tube. After dyeing, that tube can be finished as it is, or slit and finished flat. The choice affects width, stability, cutting yield and the finishes you can apply. This guide explains both routes so you can specify the right one.

Why knit fabric needs finishing at all

Wet processing leaves knit fabric stretched, distorted and unstable. Finishing brings it back to a controlled state: the right finished width, the right weight, and residual shrinkage your cutter and your customer can live with. Finishing is also when performance chemistry, coatings or mechanical finishes are added.

What is tubular knit finishing?

In tubular finishing the fabric stays in tube form from dyeing through to the final roll. It is dried and then compacted as a tube.

At Creative Dyeing & Finishing, tubular knit finishing uses:

  • A relax dryer, which dries the fabric under low tension

  • A tubular compactor, which controls shrinkage and sets the tube to width

When tubular finishing makes sense

  • Garments cut from the tube, where avoiding a slit edge is an advantage

  • Fabrics that don't need heat setting on a tenter

  • Programs where keeping the tube intact simplifies cutting

What is open-width finishing?

In open-width finishing the tube is slit along its length and the fabric is processed flat. Flat fabric can be held at a precise width on a tenter frame and heat-set.

Creative Dyeing's open-width finishing line includes:

  • A relax dryer

  • A gas heated tenter frame and an oil heated tenter frame, which set width and heat-set the fabric

  • A compactor, which controls residual shrinkage and stabilizes the fabric

When open-width finishing makes sense

  • Polyester and performance knits that need heat setting for dimensional stability

  • Fabrics that will be coated, printed or laminated

  • Programs that need a consistent, cuttable width across rolls

  • Wider fabrics laid out flat for marker efficiency

Open-width vs tubular: side-by-side

Factor

Tubular finishing

Open-width finishing

Fabric form

Stays a tube

Slit and processed flat

Width control

Set on a tubular compactor

Set on a tenter frame

Heat setting

Not the main purpose

Tenter frames can heat-set

Coating and printing

Less suited

Well suited

Creative Dyeing equipment

Relax dryer, tubular compactor

Relax dryer, two tenter frames, compactor

Questions to answer before you choose

  1. What is the fiber content? Synthetic knits that need heat setting generally point toward open width.

  2. How will the fabric be cut? Ask your cutter whether they want tubes or flat rolls.

  3. Will you add coatings, prints or other finishes? Those are typically applied to open-width fabric.

  4. What finished width and weight do you need? Give both targets so the finisher can plan the route.

  5. What shrinkage spec must you meet? Share the test method your customer uses.

If you aren't sure, send the spec and we'll recommend a route.

Common mistakes to avoid

  • Leaving the route off the purchase order. If the spec doesn't say open width or tubular, the finisher has to guess, and the rolls may not suit your cutting room.

  • Giving a greige width without a finished width. Knits change width during wet processing. The finished width is the number that matters to your marker.

  • Not giving a shrinkage test method. "Low shrinkage" means different things to different customers. Name the test and the tolerance.

  • Adding finishes late. If you plan to coat, print or nap the fabric, say so at the start so the route can be planned once.

Finishing extras

Either route can be combined with mechanical finishing. Napping and sueding raise or abrade the surface to create softness and texture. Beverly Knits' capabilities also include coating and printing plus performance finishes such as moisture management, antimicrobial, FR and PFAS-free DWR.

Dyed and finished under one roof

Because Creative Dyeing handles piece dyeing and finishing together, fabric moves straight from the dye machines to the finishing line with no extra freight between vendors. With our affiliate Beverly Knits, one of the largest circular knitters in the US, you can source greige goods, finished fabric or complete cut-and-sewn products from one group. New to outsourcing this work? Read What Is Commission Dyeing?

FAQ

Is open-width finishing more expensive than tubular?

It involves more steps, including slitting and tentering, so costs differ by fabric. Ask us for a quote on your construction.

Can tubular fabric be heat-set?

Heat setting is normally done on a tenter frame with the fabric open width. If your fabric needs heat setting, plan on open-width finishing.

Which route gives better shrinkage control?

Both routes use compaction to control shrinkage. The right choice depends on fiber, construction and your spec.

Do you finish fabric you didn't dye?

Contact us with the details of your program.

Talk to our finishing team

Creative Dyeing & Finishing

2035 Kingsley Dr, Albemarle, NC 28001

(704) 983-5555 · info@beverlyknits.com

 
 
 

Recent Posts

See All
Color Matching and Quality Control in Textile Dyeing

Why Color Accuracy Is Critical in Commercial Textile Dyeing In commercial textile dyeing, color is not a subjective judgment — it is a measurable, quantifiable property that must meet precise numerica

 
 
 

Comments


Contact Us

2035 Kingsley Dr, Albemarle, NC 28001

The Web Content Accessibility Guidelines (WCAG) define requirements for designers and developers to improve accessibility for people with disabilities. They define three levels of conformance: Level A, Level AA, and Level AAA. Creative Dyeing and Finishing, LLC aims to meet WCAG 2.1 Level AA. If any part of this site is hard to use, please contact us and we will help.

Part of the Beverly Knits family

bottom of page

The Beverly Knits Family

Beverly Knits|Creative Ticking|Creative Dyeing & Finishing